Yamaha RX-Z1 - AV Receiver

CLICK THUMBNAIL TO ENLARGE PICTURE

Yamaha RX-Z1 BASIC SPECS

Tuning range: FM, MW

Power output: 130 watts per channel into 8Ω (stereo)

Surround output: 130W (front), 130W (center), 130W (rear)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.015%

Damping factor: 200

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 100dB (line)

Channel separation: 60dB (line)

Output: 150mV (line), 1V (Pre out)

Speaker load impedance: 6Ω (minimum)

Digital inputs: coaxial, optical

Video Connections: component, composite, SVHS

Dimensions: 435 x 211 x 473mm

Weight: 28kg

Accessories: RAV-2000Z1 remote control

Year: 2003

Yamaha RX-Z1 TECHNICAL SPECIFICATIONS

Audio Section

Minimum RMS Output Power per Channel	MAIN, 20Hz-20kHz, 0.015% THD, 8Ω	130W +130W
	CENTER, 20Hz-20kHz, 0.015% THD, 8Ω	130W
	REAR, 20Hz-20kHz, 0.015% THD, 8Ω	130W + 130W
	REAR CENTER 20Hz-20kHz, 0.015% THD, 8Ω	130W
	FRONT EFFECT, 1kHz, 0.05% THD, 8Ω	45W + 45W
Dynamic Power per Channel	MAIN, 8/6/4/2 Ω	150/180/240/340W
Dynamic Headroom	8 Ω	1.2dB
Power Bandwidth	MAIN, 0.04% THD, 55W/8Ω	10Hz-50kHz
Damping Factor	MAIN/CENTER, 20Hz-20kHz, 8Ω	200 or more
Input Sensitivity/Impedance	PHONO MM	2.5mV/47kΩ
	CD, etc	CD, etc
	MAIN IN	1V/47kΩ
Maximum Input Signal Levell	PHONO MM, 1kHz, 0.05% THD, (Effect on)	100mV
Maximum Input Signal Levell	CD, etc (Effect on)	2.3V
Output Level/Impedance	REC OUT	150mV/600Ω
Output Level/Impedance	PRE OUT (MAIN, etc)	1V/1.2kΩ
SUBWOOFER (EFFECT OFF, MAIN SP:SMALL)	SPLIT	2.0V/1.2kΩ
SUBWOOFER (EFFECT OFF, MAIN SP:SMALL)	MONO	4.0V/1.2kΩ
Maximum Voltage Output (20Hz-20kHz, 1%THD)	PRE OUT (MAIN L/R)	3V
Headphone Jack Rated Output/Impedance	CD, etc, (40mV, 8Ω	150mV/100Ω
Frequency Response (10Hz-100kHz)	CD, etc, MAIN L/R	+0/-3.0dB
RIAA Equalization Deviation (20Hz-20kHz)	PHONO MM	0 +/- 0.5dB

Tone Control Characteristics

BASS:	Boost/Cut	+/-10dB (50Hz)
BASS:	Turnover Frequency	350Hz
TREBLE:	Boost/Cut	+/-10dB (20kHz)
TREBLE:	Turnover Frequency	3.5kHz
Center Graphic Equalizer	Frequency	100/300/1k/3k/10kHz
	Boost/Cut	+/-6dB
	Q	0.7
	Bass Extension	+6dB (60Hz)
Filter Characteristics	SUBWOOFER OUT:LPF	fc=90Hz, 24dB/oct

Cinema Equalizer

High	Frequency	1kHz-12.7kHz
High	Boost/Cut	-9dB to +6dB
PEQ	Frequency	1kHz-12.7kHz
	Boost/Cut	-9dB to +6dB
	Q	1.85
Total Harmonic Distortion (20Hz-20kHz)	PHONO MM to REC OUT (1V)	0.01%
	CD, etc, to PRE OUT MAIN L/R (1V)	0.005%
	MAIN IN to L/C/R SP OUT (55W/8Ω)	0.005%
Signal-to-Noise Ratio (IHF-A-Network)	CD, etc, Input shorted (Effect off)	100dB or more
Residual Noise (IHF-A-Network)	MAIN, SP OUT	150uV
Channel Separation (Vol. -30dB, Effect off)	PHONO MM, Input Shorted, 1kHz/10kHz	70dB/60dB
Channel Separation (Vol. -30dB, Effect off)	CD, etc, Input 5.1kΩ Shorted, 1kHz/10kHz	70dB/60dB
VIDEO SECTION	Video Signal Type	NTSC
VIDEO SECTION	Composite Video Signal Level	1Vp-p/75Ω
S Video Signal Level	Y	1Vp-p/75Ω
S Video Signal Level	C	0.286Vp-p/75Ω
Component Signal Level	Y	1Vp-p/75Ω
	Cb/Cr	0.7V/75Ω
	Video Maximum Input Level	1.5Vp-p
	Video Signal-to-Noise Ratio	50dB
Monitor Output Frequency Response	Composite Video Signal	5Hz-10MHz, -3dB
	S-Video Signal	5Hz-10MHz, -3dB
	Component Signal	DC-100MHz, -3dB
TUNER SECTION (FM)	Tuning Range	87.5 to 107.9MHz
50dB Quieting Sensitivity (IHF, 75Ω)	Mono (1kHz, 100% Mod)	1.6uV (15.3dBf)
	Stereo (1kHz, 100% Mod)	23uV (38.5dBf)
	Alternate Channel Selectivity (+/-400kHz)	75dB
Signal-to-Noise Ratio	Mono/Stereo (IHF)	81/75dB
Harmonic Distortion	Mono/Stereo (1kHz)	0.1./0.2%
Stereo Separation	1kHz	48dB
Frequency Response	20Hz-15kHz	0 +/- 1.0dB
Output Level	FM 100% Mod. 1kHz	550mV
Output Level	Antenna Input	75Ω
TUNER SECTION (AM)	Tuning Range	530 to 1,710kHz
TUNER SECTION (AM)	Usable Sensitivity	300uV/m
Output Level	AM 30% Mod. 1kHz	150mV
	Signal-to-Noise Ratio	52dB
	Antenna	Loop Antenna
	Dimensions (W x H x D)	17 1/8" x 8 5/16 x 17 1/2"
	Weight	62 lbs