Yamaha RX-V590 - AV Receiver

CLICK ON THUMBNAIL TO ENLARGE PICTURE

Yamaha RX-V590 BASIC SPECS

Tuning range: FM, MW

Power output: 75 watts per channel into 8Ω (stereo)

Surround output: 75W (front), 75W (center), 20W (rear)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.04%

Damping factor: 80

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 85dB (MM), 99dB (line)

Channel separation: 50dB (MM), 44dB (line)

Output: 150mV (line), 2.2V (Pre out)

Video Connections: composite

Dimensions: 435 x 146 x 386mm

Weight: 9.5kg

Accessories: remote control

Year: 1995

Yamaha RX-V590 TECHNICAL SPECIFICATIONS

Minimum RMS Output Power per Channel		FRONT, 20Hz to 20kHz, 0.04% THD, 8 ohms = 75W CENTER, 1kHz, 0.07% THD, 8 ohms = 75W REAR, 1kHz, 0.3% THD, 8 ohms = 20W
Dynamic Power per Channel		(IHF)8/6/4/2/ ohms = 110/140/170/190W
Dynamic Headroom		(8 ohms) = 1.66dB
Power Bandwidth		0.08% THD,30W, 8 ohms = 10Hz to 50kHz
Damping Factor (8 ohms, 20 Hz-20 kHz)		80 or more
Input Sensitivity/ Impedance		PHONO MM = 2.5mV/47k-ohms CD etc. = 150mV/47k-ohms
Maximum Input Signal Level		(1kHz, 0.5% THD) PHONO MM = 115mV CD etc. = 2.2V
Output Level/ Impedance		REC OUT = 150mV/1k-ohms PRE OUT= 2.2V/1.2k-ohms LPF (EFFECT OFF) = 3.5V/1.5k-ohms
Headphone Jack Rated Output/Impedance		Input 1kHz, 150mV, 8 ohms = 0.5V/390 ohms
Frequency Response		(20Hz to 20kHz) CD etc. FRONT = 0+/-0.5dB
RIAA Equalization Deviation		(20Hz to 20kHz)PHONO MM = 0+/-0.5dB
Total Harmonic Distortion		(20Hz to 20kHz) PHONO MM to REC OUT (1V) = 0.02% CD etc. FRONT SP OUT (30W/8 ohms) = 0.02% CD etc. to REAR SP OUT, 1kHz (10W/8 ohms) = 0.3%

Signal-to-Noise Ratio		(IHF-A-Network)PHONO MM, Input Shorted (5mV) REC OUT = 85dB CD etc., Input Shorted SP OUT (EFFECT OFF) = 99dB

Residual Noise		(IHF-A-Network)FRONT, SP OUT = 140uV
Channel Separation		(Vol. -30dB, EFFECT OFF) PHONO MM, Input Shorted, 1kHz/10kHz = 60dB/50dB CD etc, Input 5.1k ohms Shorted, 1kHz/10kHz = 60dB/44dB
Tone Control Characteristics		BASS Boost/cut = +/-10dB (50Hz) Turnover Frequency = 350Hz TREBLE Boost/cut = +/-10dB (20kHz) Turnover Frequency = 3.5kHz
Filter Characteristics		LPF = fc=200Hz, 6dB/oct
Gain Tracking Error		(0dB to - 60dB) = 3dB
Turner Output Level/Impedance		FM (100% mod., 1kHz) = 500mV/2.2k-ohms AM (30% mod., 1kHz) = 150mV/2.2k-ohms
Tuning Range		87.5 to 107.9 MHz
50dB Quieting Sensitivity		(IHF, 75 ohms)Mono = 1.55uV (15.1dBf)Stereo = 21uV (37.7dBf)
Usable Sensitivity		(75 ohms)30dB S/N Quieting, 1kHz, 100% mod. = 0.8uV (9.3dBf)
Image Response Ratio		45dB
If Response Ratio		80dB
Spurious Response Ratio		70dB
AM Suppression Ratio		55dB
Capture Ratio		1.5dB
Alternate Channel Selectivity		85dB
Harmonic Distortion		(1kHz)Mono/Stereo = 0.1/0.2%
Stereo Separation		(1kHz) = 50dB
Selectivity		32dB
Video Signal Level		1Vp-p/75 ohms
Maximum Input Level		1.5Vp-p
Monitor Output Frequency Response		5Hz ~ 10MHz, -3dB
Power Supply		AC120V, 60Hz
Power Consumption		290W/350A
AC Outlets		Switched x 2 = 120W max (Total)
Dimensions		(W * H * D) = 435 * 146 * 386mm (17-1/8" * 5-3/4" * 15-3/16")
Weight		9.5kg (20 lbs 15 oz)
Accessories		AM Loop antenna x 1 Indoor FM antenna x 1 Remote Control Transmitter x 1 Battery (size "AA, "RO6") x 2