CLICK ON THUMBNAIL TO ENLARGE PICTURE
 |
Yamaha HTR-5250 BASIC SPECS
Tuning range: FM, MW
Power output: 100 watts per channel into 8Ω (stereo)
Surround output: 100W (front), 100W (center), 100W (rear)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.06%
Damping factor: 80
Input sensitivity: 150mV (line)
Signal to noise ratio: 99dB (line)
Channel separation: 45dB (line)
Output: 150mV (line), 2.1V (Pre out)
Speaker load impedance: 4Ω (minimum)
Digital inputs: coaxial, optical
Video Connections: composite, SVHS
Dimensions: 435 x 151 x 391mm
Weight: 11.2kg
Accessories: remote control
|
Yamaha HTR-5250 TECHNICAL SPECIFICATIONS
| Minimum RMS Output Power per Channel | MAIN, 20Hz-20kHz, 0.06% THD, 8 ohms...100W + 100WCENTER, 20Hz-20kHz, 0.06% THD, 8 ohms...100WREAR, 20Hz-20kHz, 0.06% THD, 8 ohms...100W + 100W | |
|---|---|---|
| Dynamic Power per Channel | MAIN, 8/6/4/2 ohms...130/150/190/240W | |
| Dynamic Headroom | 8 ohms...1.14dB | |
| Damping Factor (8 ohms, 20 Hz-20 kHz) | MAIN L/R, 80 | |
| Input Sensitivity/ Impedance | PHONO MM...2.5mV/47k ohmsCD, etc...150mV/47k ohms | |
| Maximum Input Signal Level | PHONO MM, 1kHz, 0.05% THD, (Effect on)...100mVCD, etc (Effect on)...2.2V | |
| Output Level/ Impedance | REC OUT...150mV/1.2k ohmsPRE OUT (MAIN < etc)...2.1V/1.2k ohmsSUBWOOFER (EFFECT OFF, MAIN SP:SMALL)MONO...4.0V/1.2k ohms | |
| Headphone Jack Rated Output/Impedance | CD, etc, (150mV, 8 ohms)...340mV/560 ohms | |
| Frequency Response (10Hz-100kHz) | CD, etc, MAIN L/R...+0/-3.0dB | |
| RIAA Equalization Deviation | PHONO MM...0 +/- 0.5dB | |
| BASS | Boost/Cut...+/-10dB (50Hz)Turnover Frequency...350Hz | |
| TREBLE | Boost/Cut...+/-10dB (20kHz)Turnover Frequency...3.5 kHz | |
| Bass Extension | +6dB (60Hz) | |
| Filter Characteristics | SUBWOOFER OUT: LPF...fc=90Hz, 18dB/octMAIN, CENTER, REAR SP SMALL: HPF...fc=90Hz, 12dB/oct | |
| Total Harmonic Distortion (20Hz-20kHz) | PHONO MM to REC OUT (1V)...0.02%CD, etc, to MAIN SP OUT L/R (1V)...0.06% | |
| Signal-to-Noise Ratio (IHF-A-Network) | CD, etc, Input Shorted (Effect off)...99dB | |
| Residual Noise (IHF-A-Network) | MAIN, SP OUT...150uV | |
| Channel Separation (Vol.-30dB, Effect off) | PHONO MM, Input Shorted, 1kHz...60dBCD, etc, Input 5.1k ohms Shorted, 1kHz...60dB | |
| Muting | - infinity | |
| Video Signal Type | NTSC | |
| Composite Video Signal Level | 1Vp-p/75 ohms | |
| S Video Signal Level | Y...1Vp-p/75 ohmsC...0.286Vp-p/75 ohms | |
| Component Signal Level | Y...1Vp-p/75 ohmsCb/Cr...0.7V/75 ohms | |
| Video Maximum Input Level | 1.5Vp-p | |
| Video Signal-to-Noise Ratio | 50 dB | |
| Monitor Output Frequency Response | Composite Video Signal...5Hz-10MHz, -3dBS-Video Signal...5Hz-10MHz, -3dBComponent Signal...DC-30MHz, -3dB | |
| Tuning Range | 87.5 to 107.9MHz | |
| 50dB Quieting Sensitivity (IHF, 75ohms) | Mono (1kHz, 100% Mod)...1.6uV (15.3dBf)Stereo (1kHz, 100% Mod)...23uV (38.5dBf) | |
| Selectivity (400kHz) | 75dB | |
| Signal-to-Noise Ratio | Mono/Stereo (IHF)...81/75dB | |
|---|---|---|
| Harmonic Distortion | Mono/Stereo (1kHz)...0.1./0.2% | |
|---|---|---|
| Stereo Separation | 1kHz...48dB | |
| Frequency Response | 20Hz-15kHz...+0.5/-2.0dB | |
| Output Level | FM 100% Mod. 1kHz...550mV | |
| Antenna Input | 75 ohms unbalanced | |
| Usable Sensitivity | 300uV/m | |
| Antenna | Loop Antenna | |
| Dimensions | Width = 17 1/8 in.Height = 5 15/16 in.Depth = 15 3/8 in. | |
| Weight | 25 lbs. | |
FIND MORE INFORMATIONS ABOUT Yamaha HTR-5250
Yamaha HTR-5250 INFO SHEET | Yamaha HTR-5250 USER MANUAL | Yamaha HTR-5250 SERVICE MANUAL | Yamaha HTR-5250 REMOTE REPLACEMENT
CHECK ACTUAL Yamaha HTR-5250 OFFERS AND PRICES:
0 komentarze:
Post a Comment